routeros双ADSL负载平衡脚本 routeros双ADSL负载平衡脚本 [plain] # may/25/2013 09:26:48 by RouterOS 5.20 /ip firewall mangle add action=mark-connection chain=input disabled=no in-interface=pppoe-out1 new-connection-mark=wan1_conn passthrough=yes add action=mark-connection chain=input disabled=no in-interface=pppoe-out2 new-connection-mark=wan2_conn passthrough=yes add action=mark-routing chain=output connection-mark=wan1_conn disabled=no new-routing-mark=to_wan1 passthrough=yes add action=mark-routing chain=output connection-mark=wan2_conn disabled=no new-routing-mark=to_wan2 passthrough=yes add action=mark-connection chain=prerouting disabled=no dst-address-type=!local in-interface=wan1 new-connection-mark=wan1_conn passthrough=yes / per-connection-classifier=both-addresses-and-ports:2/0 add action=mark-connection chain=prerouting disabled=no dst-address-type=!local in-interface=wan1 new-connection-mark=wan2_conn passthrough=yes / per-connection-classifier=both-addresses-and-ports:2/1 add action=mark-connection chain=prerouting disabled=no dst-address-type=!local in-interface=wan2 new-connection-mark=wan1_conn passthrough=yes / per-connection-classifier=both-addresses-and-ports:2/0 add action=mark-connection chain=prerouting disabled=no dst-address-type=!local in-interface=wan2 new-connection-mark=wan2_conn passthrough=yes / per-connection-classifier=both-addresses-and-ports:2/1 add action=mark-routing chain=prerouting connection-mark=wan1_conn disabled=no in-interface=wan1 new-routing-mark=to_wan1 passthrough=yes add action=mark-routing chain=prerouting connection-mark=wan2_conn disabled=no in-interface=wan1 new-routing-mark=to_wan2 passthrough=yes add action=mark-routing chain=prerouting connection-mark=wan1_conn disabled=no in-interface=wan2 new-routing-mark=to_wan1 passthrough=yes add action=mark-routing chain=prerouting connection-mark=wan2_conn disabled=no in-interface=wan2 new-routing-mark=to_wan2 passthrough=yes /ip firewall nat add action=masquerade chain=srcnat disabled=no out-interface=pppoe-out1 add action=masquerade chain=srcnat disabled=no out-interface=pppoe-out2 /ip route add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out1 routing-mark=to_wan1 scope=30 target-scope=10 add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out2 routing-mark=to_wan2 scope=30 target-scope=10 add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out1 scope=30 target-scope=10 add check-gateway=ping disabled=no distance=2 dst-address=0.0.0.0/0 gateway=pppoe-out2 scope=30 target-scope=10 这个脚本是从老外Alex复制来的。亲证好用,他原来是4线的。可以往上加,修改2/0 2/1 为4/0 4/1 4/2 4/3网银也好用,并且下载带宽可以叠加。 interfaces里,拨号端是 wan1 wan2; 接局域网是 lanPPPOE拨号是 pppoe-out1和pppoe-out2,使用这个默认名字比较好。这几个符号改来改去,比较容易混淆。 网卡界面和拨号需要手动添加一下,主要是mangle和route两部分。 复制后,在new terminal里面粘贴就可以了。